Address : 50 Raffles Place Land
Tower Singapore
Call Us : +65 31591871
Mail Us : [email protected]
Office Time : Monday to Sunday
08:00 - 20:00

Extreme temperature, extreme condition grease

Extreme temperature, extreme condition grease

SKF Extreme Temperature, Extreme Condition Bearing Grease LGET 2

SKF LGET 2 is a synthetic fluorinated oil based grease, using a PTFE thickener. It is especially suitable for applications at extremely high temperatures from 200 °C (390 °F) up to

260 °C (500 °F).

Long life in aggressive environments such as very reactive areas with a presence of high purity gaseous oxygen and hexane

Excellent oxidation resistance

Good corrosion resistance

Excellent water and steam resistance

Typical applications:

Bakery equipment (ovens)

Kiln truck wheels

Load rollers in copying machines

Wafer baking machines

Textile dryers

Film stretching tenders

Electric motors running at extreme temperatures

Emergency / hot fans

Vacuum pumps

Available pack sizes
Packsize Designation
50 g syringe LGET 2/0.050
1 kg can LGET 2/1
Technical data
Designation LGET 2/(pack size)
DIN 51825 code KFK2U-40
NLGI consistency class 2
Thickener PTFE
Colour Off white
Base oil type PFPE
Operating temperature range –40 to +260 °C

(–40 to +500 °F)
Dropping point DIN ISO 2176 >300 °C (>570 °F)
Base oil viscosity  
40 °C, mm²/s

100 °C, mm²/s
400

38
Penetration DIN ISO 2137  
60 strokes, 10–1 mm 265–295
Mechanical stability  
Roll stability, 50 hrs at 80 °C, 10–1 mm ±30 max. 130 °C (265 °F)
Corrosion protection  
Emcor:
– standard ISO 11007 1–1 max.
Water resistance  
DIN 51 807/1, 3 hrs at 90 °C 0 max.
Oil separation  
DIN 51 817, 7 days at 40 °C, static, % 13 max. 30 hrs at 200 °C (390 °F)
Copper corrosion  
DIN 51 811
1 max. at 150 °C (300 °F)
Rolling bearing grease life  
R0F test L50 life at 10 000 r/min., hrs >1 000 1) at 220 °C (428 °F)
EP performance  
4–ball test, welding load DIN 51350/4, N 8 000 min.
* Typical value
Important note:

LGET 2 is a fluorinated grease and is not compatible with other greases, oils and preservatives (except LGED 2). Therefore, very thorough cleaning of bearings and systems is essential before applying fresh grease